Raised Access Floor
Batch download
Laying type
-
Network Floor 40
- Load-bearing capacity
- 3000N・5000N
- Basic dimensions
- 600 × 600
- Product height
- H=40
- Material
- Made from ultra-high strength lightweight concrete
-
Network Floor 29
- Load-bearing capacity
- 3000N・5000N
- Basic dimensions
- 600 × 600
- Product height
- H=29
- Material
- Made from ultra-high strength lightweight concrete
-
High-steel (H=93mm)
- Load-bearing capacity
- 3000N・5000N
- Basic dimensions
- 500×500 (165×165)
- Product height
- H=93
- Material
- Steel + flame-retardant resin
-
High-steel (H=70mm)
- Load-bearing capacity
- 3000N・5000N
- Basic dimensions
- 500×500 (165×165)
- Product height
- H=70
- Material
- Steel + flame-retardant resin
Standard pedestal type
-
Quadfix 600
- Load-bearing capacity
- 3000N
- Basic dimensions
- 600 × 600
- Product height
- H=50～165 (*H=165 and above are made to order)
- Material
- Wood core + steel
Multipurpose flooring material
-
Flexible Mat
- Load-bearing capacity
- ≒10000N
- Basic dimensions
- 600 × 600
- Product height
- H=40
- Material
- Made from ultra-high strength lightweight concrete
Recommended pages to go with this
Related content
On this page, you can download the CAD data for each product. However, if you are downloading for the first time, we will issue a download password.Registration formPlease enter the required information. The issued password can be used multiple times, so please manage it yourself. The PDF data can be downloaded for free.
Points to note
- The CAD data downloaded from this page is not for construction purposes, but should be used for planning purposes etc.
- The copyright of the drawing information (CAD data and image data) belongs to KYODO KY-TEC.
Any unauthorized reproduction or reuse of the data on this page for purposes other than your "architectural design and construction considerations" is strictly prohibited. - The CAD data on this page may not match the actual product.
Please note that files may be deleted or updated without notice due to product improvements, etc.
Furthermore, we cannot guarantee any damages caused by CAD data. - Please note that some products may not be listed.
- The DWG data is in (2000/LT2000) format.
- The DXF data is the DWG data above converted using Autocad (©Autodesk).
- The JWW data was converted from the data in 1 above using dedicated software. Please note that layer settings etc. have been discarded.
- The PDF data was created by outputting the data in 1 above from AutoCAD using the print table "monochrome.ctb".